ALPINE PDX-V9 5-CHANNEL EXTREME POWER DENSITY DIGITAL AMPLIFIER PDXV9

December 7, 2013 - Comment

Brand new not refurbished unitSPECIFICATIONS : CEA-2006 Power RatingsCEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N) Max Power Output RatingsMax Power: 1600WRMS Power RatingsPer channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)Per channel into 2 Ohms: 100W RMS x 4

Brand new not refurbished unitSPECIFICATIONS : CEA-2006 Power RatingsCEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N) Max Power Output RatingsMax Power: 1600WRMS Power RatingsPer channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N)Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V 10k ohmsFrequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 3 – 100k HzFrequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 3 – 600 HzTHD+N (10W into 4 Ohms) for CH-1/2/3/4: <0.005 %THD+N (10W into 4 Ohms) for Subwoofer: <0.006 %THD+N (Rated Power into 4 Ohms) for CH-1/2/3/4: <0.03 %THD+N (Rated Power into 4 Ohms) for Subwoofer: 500 into 4 ohms at 100HzDamping Factor for Subwoofer: >1000 into 4 ohms at 100HzSignal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 112 dBSignal to Noise (Rated Power into 4 Ohms) for Subwoofer: 119 dBWeight: 2.7 kg FEATURES InstallConnectors: Quick Connect Terminals for Power Supply and Speaker OutputTerminal Layout: One-SidedMounting Design: Easy Stacking and Smart InstallationGeneralAmplifier Type: Class-D (Digital)Channel Design: 4-channel + 1-channel (Mono)Power Supply Design: DC-DC PWM Power SupplyPre-Amp Stage: DiscreatFinal Outputs: MOSFETCrossover: Variable High Pass, Low Pass and Band Pass FilterGain Control: Continuously Adjustable Gain ControlSubsonic Filter: Variable Subsonic FilterBass Control: Remote Bass Control (RUX-KNOB) ReadyLow-battery Protection: Low-battery ProtectionLow-impedance Possibility: Low-impedance PossibilityCurrent Protection: Over-Current, Over-Voltage and Thermal ProtectionBoard Circuitry: S.T.A.R. CircuitBoard Design: 6-layer Glass Epoxy PC BoardPower Indicator: Top Mounted LED Power/Status IndicatorInput Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)Thermal Control: Thermal Management Control

Comments

Comments are disabled for this post.